|
|
| Account Active: |
No
Yes
|
| Account Name: |
(e.g., MyCompany) |
| SIP Server: |
(e.g., sip.mycompany.com, or IP address) |
| Outbound Proxy: |
(e.g.,
proxy.myprovider.com, or IP address, if any) |
| SIP User ID: |
(PIN_7_first-digits / Les 7 premiers chiffres du PIN) |
| Authenticate ID: |
(PIN_7_first-digits / Les 7 premiers chiffres du PIN) |
| Authenticate Password: |
(PIN_4_last-digits / Les 4 derniers chiffres du PIN)
|
| Name: |
(optional,
e.g., John Doe) |
| Use DNS SRV: |
No
Yes
|
| User ID is phone number: |
No Yes |
| SIP Registration: |
No
Yes |
| Unregister On Reboot: |
No Yes |
| Register Expiration: |
(in
minutes. default 1 hour, max 45 days) |
| local SIP port: |
(default 5064) |
| SIP T1 Timeout: |
|
| SIP T2 Interval: |
|
| NAT Traversal (STUN): |
No
No,
but send keep-alive Yes |
| SUBSCRIBE for MWI: |
No
Yes |
| PUBLISH for Presence: |
No
Yes |
| Proxy-Require: |
|
| Voice Mail UserID: |
(User
ID/extension for 3rd party voice mail system) |
| Send DTMF: |
in-audio
via
RTP (RFC2833) via SIP INFO |
| Early Dial: |
No
Yes
(use "Yes" only if proxy supports 484 response) |
| Dial Plan Prefix: |
(this prefix
string is added to each dialed number) |
| Enable Call Features: |
No
Yes
(if Yes, Call Forwarding & Call-Waiting-Disable are
supported locally) |
| Call Log: |
Log All
Calls
Log
Incoming/Outgoing only (Missed calls NOT
recorded)
Disable Call Log |
| Session Expiration: |
(in
seconds. default 180 seconds) |
| Min-SE: |
(in
seconds. default and minimum 90 seconds) |
| Caller Request Timer: |
No Yes (Request for timer when making outbound
calls) |
| Callee Request Timer: |
No Yes (When caller supports timer but did not request
one) |
| Force Timer: |
No Yes (Use timer even when remote party does not
support) |
| UAC Specify Refresher: |
UAC
UAS Omit (Recommended) |
| UAS Specify Refresher: |
UAC
UAS (When UAC did
not specify refresher tag) |
| Force INVITE: |
No Yes (Always refresh with INVITE instead of
UPDATE) |
| Enable 100rel: |
No Yes |
| Account Ring Tone: |
system
ring tone
custom
ring tone 1
custom ring tone 2
custom ring tone 3
|
| Send Anonymous: |
No
Yes
(caller ID will be blocked if set to Yes) |
| Anonymous Method: |
Use
From Header Use Privacy Header |
| Auto Answer: |
No
Yes
|
| Allow Auto Answer by Call-Info: |
No
Yes
|
| Turn off speaker on remote disconnect:
|
No
Yes
|
| Check SIP User ID for incoming INVITE:
|
No
Yes
|
Preferred Vocoder:
(in
listed order) |
choice 1:
choice 2:
choice 3:
choice 4:
|
choice 5:
choice 6:
choice 7:
choice 8:
| |
| SRTP Mode: |
Disabled Enabled but not forced Enabled and forced |
| Special Feature: |
|
|
|
|
|